Be the first to write a review
You must be logged in to post a comment.
₹560.00
SARPA is our 12 mm Type A Low Stretch Static rope designed for abseiling (rappelling), canyoning, fixed rope, roping up, zip-lining and a bunch of other adventure activities that requires low stretch.
Available in multiples of five meters. Enter the number of meters you require under Quantity. For quantities higher than 100 meters the rope is shipped on a spool.
TECHNICAL SPECIFICATIONS
SARPA 12 mm
Construction: Kernmantle
Core Material: 100% Polyamide
Sheath Material: 100% Polyamide
Weight: 68 gm/meter
Breaking strength without knots: 32 kN
Breaking Strength with an overhand knot: 23 kN
Sheath to Core ratio: 40% : 60%
Knotability coefficient: 1.0
Shrinkage: 3.6%
Minimum number of factor one falls before breaking under 100 kg load: 8
Elongation under 50/150 load configuration: 1.5%
Impact Force with factor fall 0.3: 5.2 kN
Sheath Slippage: 0.1%
EN 1891, CE 1019 and UIAA 107 (awaited)
You must be logged in to post a comment.
– Heavy duty textile with coating on both sides. This means a substantially long life of the protector
– Velcro fastener along the length of the protector
– Fabric has insulating properties to prevent the rope from getting heated up too easily
This is an all-rounder climbing harness designed specifically for lead climbers. The well thought out features and its ergonomic design makes this one harness very versatile and suitable for many forms of climbing. This harness features our Lean waist belt. It above normal width but countered and lean design makes for a perfect fit around your waist. This feature was added keeping the route openers in mind who might have to hang in their harnesses for longer durations while bolting a new route.
TECHNICAL SPECIFICATIONS
• Waist belt strength rating: 18kN. For your comparison UIAA’s minimum requirement: 10kN)
• Belay Loop breaking strength: 26kN. UIAA’s minimum requirement is 15kN
• Buckles: Stainless Steel. Breaking strength = 16kN
• the harness is made from BLUESIGN certified breathable and water repellent Sympatex fabric. The fabric is a three layered bonded fabric that is made in Japan.
• Haul Loop on the rear rated at 5kN
• Molded gear loops: 4
• Leg Loops: Elasticated
• This is a Unisex harness
• Weight: 300gms
• EN 12277, CE
Recommended Use
Lead climbing, trad climbing, sport climbing, mountaineering
One Tool to rule them all!
A versatile nut tool designed for Trad, mixed- Sport and Big Wall climbing. Tightens nuts and maillons, wriggles out those obstinate nuts, and the hooked nose grabs onto cam bars in the deepest cracks. The screw driver end helps undo those stubborn knots, works as a pry tool, and finding an additional new use for this multi-tool is not a challenge.
– Weight: 64 g (2.3 oz.)
– Material: Zinc plated hardened Steel
– Built in wrenches of sizes 13, 17 & 19 mm, which work with 10, 12 mm & 3/8 inch Rawl bolts, open wrench sizes 14 & 17mm
– Philips head screw driver
– Centimeter markings along the side
Dynamo Expansion Bolt, M10X100mm, SS304, for rock anchors.
Reviews
There are no reviews yet!