Description
– Polyamide webbing construction.
– Reinforced anchor loop and self anchor loop.
– Reinforced rungs to prevent easy wear and tear.
₹2,600.00
– Ladder style rungs for easier footwork.
– Aluminium Alloy spreader bar.
– All six rungs rated at 5 kN.
– Length: 160 cm.
– Width: 30 cm.
– Polyamide webbing construction.
– Reinforced anchor loop and self anchor loop.
– Reinforced rungs to prevent easy wear and tear.
You must be logged in to post a comment.
A body harness would keep you in an upright position even in the case of unconsciousness
Material Composition and Physical Properties
MBS and Certifications
Expected Life Span:
NOTE: If you see any sign of wear and tear in the harness, it is better to retire the equipment.
Each piece of equipment is meticulously inspected and a batch is tested for breaking strength (destructive) before shipping.
User Instructions Download the PDF
Belay and rappelling gloves. The palm and fingers are reinforced with double layers of soft leather. The back of the hand is layered with breathable mesh. This product is a crossover between a climbing glove and a mitten. This makes it highly functional, breathable and comfortable to wear. The grip is superior to any regular mitten.
– Stainless Steel 304 wedge type expansion bolts for outdoor use (not marine grade).
– Diameter: 10mm
– Placement length: 62mm
– Recommended length of bore in rock: 70mm
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.
The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)
– EN959:2007, CE3076
User Instructions Download the PDF
User Instructions Download the PDF
– Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
– Bore diameter: 10mm
– This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
– Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.
The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)
– EN959:2007, CE3076
User Instructions Download the PDF
User Instructions Download the PDF
Reviews
There are no reviews yet!