Be the first to write a review
You must be logged in to post a comment.
Free shipping on all orders
Free shipping on all orders
-
₹0.00
- No products in the cart.
Badami Anchor Pack
₹1,500.00 (all prices include GST )
This pack has been put together keeping Badami climbing season in India in mind. The pack includes the following equipment
5 pcs. M10 Dynamo Rock Hanger (Material grade: SS 304)
5 pcs. M10 Nuts only (Material grade: SS 304)
1 pc. Badami Nut Tool
Hangers have EN959 and CE 3076 certification
Breaking Strength of Hangers: 32kN in Radial direction of loading
Related products
-
– Stainless Steel 304 wedge type expansion bolts for outdoor use (not marine grade).
– Diameter: 10mm
– Placement length: 62mm
– Recommended length of bore in rock: 70mm
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)– EN959:2007, CE3076
- Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN.We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile)
- Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
- Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
User Instructions
Download the PDF
User Instructions Download the PDF -
- A good all-rounder and durable helmet for ice climbing, mountaineering and multi-pitch trad climbing.
- Optimal ventilation via the integrated venting system
- Universal headlamp attachments
- Fits heads 52 to 61 cms
- 11 vents (6 on the sides, 2 in front and 3 on the back) make this helmet wearable even in hot weather conditions. “A helmet that makes your head warm could lead to more problems than just discomfort. At best it could lead to lead to a reduction in your performance, at worst it could lead to an impaired judgement that could possibly lead to injuries.”- BMC Helmet Guidebook
- Adujstable head band via the wheel at the rear, and adjustable Y straps; allow for comfortable and optimal fit.
User Instructions
Download the PDF
Reviews
There are no reviews yet!