NORRA 2 LITE
Power Foot Loop
Vajra 10 mm rope
Rain Poncho 60L Plus
Bouldering Gym Crash Mats
Six Step Etrier
Badami Nut Tool
Dynamo Expansion Bolt M10x70mm – SS304
KAMET 2
Yosemite Crashpad Outer Cover Replacement
Ladder Style Etrier
Badami Anchor Pack
Fleece Sleeping Bag Liner - Mummy Style
Dunagiri Body Harness
Cotton Sleeping Bag Liner - Mummy Style
Aluminium Snow Picket / Anchor
Crazy Owl Chalk Bag
ALUMINIUM HOOK TENT STAKES (PACK OF 6)
Alpine Fitted Gaiter
Gipfel Stainless Steel Rappel or Descending Ring SS304
Meru Harness
ALUMINIUM TENSIONERS FOR TENTS (PACK OF 6)
Kraken 1 - Ultralight
Cora 1
Shield UL Nylon Sleeping Bag Liner
Kraken 2 - Ultralight
Lite 25L
Dynamo Expansion Bolt M10x100mm – SS304
Silk Sleeping Bag Liner - Mummy Style
Cora 2
Rappelling Mittens
CRUX EMERGENCY TENT
Gipfel Backpack
Ranger 55L Backpack
Hiking boot bag
Summer Quilt Sleeping BagYou may be interested in…
-
– Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
– Bore diameter: 10mm
– This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
– Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)– EN959:2007, CE3076
- Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile).
- Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
- Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
User Instructions
Download the PDF
User Instructions Download the PDF -
– This popular workhorse of a crashpad will serve you well from sit-starts to High-balls. Whether you are a beginner boulderer or bouldering at the cutting edge grades, Badami will serve you well.
– Triple density foam cushioning for maximum safety and a great landing area
– Hinge style folding with taper cut to avoid twisting of ankles
– Curved edges to avoid wear and tear
– Aluminium buckles closure
– 130 x 115 x 11 cms
– Weighs 7.5 kg
– Padded shoulder straps with waist belt. Also has carry handles
– Tested in accordance to EN 1177:2008
– Proudly made in India
User / Product Instruction Manual: Download the PDF
