Be the first to write a review
You must be logged in to post a comment.
₹500.00 – ₹550.00
– Double rings anchors available in SS 316 (for M12 bolts) and SS 304 (for M10 bolts) grades
– Our regular Dynamo rock anchor conforms to EN 959:2016 and CE 3076
– MBS (rings): 30 kN
You must be logged in to post a comment.
– 304 Stainless Steel for outdoors and indoors use
– Breaking Strength : 45kN, Safe Working Load: 11kN
– These are not yet CE and UIAA certified but we guarantee the performance and breaking load
– Individually tested before shipping for your safety
– Stainless Steel 304 wedge type expansion bolts for outdoor use (not marine grade).
– Diameter: 10mm
– Placement length: 62mm
– Recommended length of bore in rock: 70mm
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.
The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)
– EN959:2007, CE3076
User Instructions Download the PDF
User Instructions Download the PDF
– Material: Nylon.
– Weight: 250 Gms.
– Length: 180 cms.
– Colour: Grey/Blue.
– Foot loops rated at 5 KN.
– Can be anchored on ascenders using a carabiner through the eye hole. Also for independent use on overhangs and roofs.
– Foot loops reinforced with heavy duty nylon.
– Heavy duty yet very economical Rappelling/Abseiling mittens made with recycled worn-out denims
– Thick hard wearing leather layer with a double reinforcement on the palm and back.
Reviews
There are no reviews yet!