Description
– Comes with a tie in loop and gloves clipper to hang this pair of mittens on the gear loops of your harness.
– Leather reinforcements on both front and back of the mitten.
₹370.00
– Heavy duty yet very economical Rappelling/Abseiling mittens made with recycled worn-out denims
– Thick hard wearing leather layer with a double reinforcement on the palm and back.
Out of stock
– Comes with a tie in loop and gloves clipper to hang this pair of mittens on the gear loops of your harness.
– Leather reinforcements on both front and back of the mitten.
You must be logged in to post a comment.
– Double rings anchors available in SS 316 (for M12 bolts) and SS 304 (for M10 bolts) grades
– Our regular Dynamo rock anchor conforms to EN 959:2016 and CE 3076
– MBS (rings): 30 kN
SARPA is our 12 mm Type A Low Stretch Static rope designed for abseiling (rappelling), canyoning, fixed rope, roping up, zip-lining and a bunch of other adventure activities that requires low stretch.
Available in multiples of five meters. Enter the number of meters you require under Quantity. For quantities higher than 100 meters the rope is shipped on a spool.
TECHNICAL SPECIFICATIONS
SARPA 12 mm
Construction: Kernmantle
Core Material: 100% Polyamide
Sheath Material: 100% Polyamide
Weight: 68 gm/meter
Breaking strength without knots: 32 kN
Breaking Strength with an overhand knot: 23 kN
Sheath to Core ratio: 40% : 60%
Knotability coefficient: 1.0
Shrinkage: 3.6%
Minimum number of factor one falls before breaking under 100 kg load: 8
Elongation under 50/150 load configuration: 1.5%
Impact Force with factor fall 0.3: 5.2 kN
Sheath Slippage: 0.1%
EN 1891, CE 1019 and UIAA 107 (awaited)
This is an all-rounder climbing harness designed specifically for lead climbers. The well thought out features and its ergonomic design makes this one harness very versatile and suitable for many forms of climbing. This harness features our Lean waist belt. It above normal width but countered and lean design makes for a perfect fit around your waist. This feature was added keeping the route openers in mind who might have to hang in their harnesses for longer durations while bolting a new route.
TECHNICAL SPECIFICATIONS
• Waist belt strength rating: 18kN. For your comparison UIAA’s minimum requirement: 10kN)
• Belay Loop breaking strength: 26kN. UIAA’s minimum requirement is 15kN
• Buckles: Stainless Steel. Breaking strength = 16kN
• the harness is made from BLUESIGN certified breathable and water repellent Sympatex fabric. The fabric is a three layered bonded fabric that is made in Japan.
• Haul Loop on the rear rated at 5kN
• Molded gear loops: 4
• Leg Loops: Elasticated
• This is a Unisex harness
• Weight: 300gms
• EN 12277, CE
Recommended Use
Lead climbing, trad climbing, sport climbing, mountaineering
A body harness would keep you in an upright position even in the case of unconsciousness
Material Composition and Physical Properties
MBS and Certifications
Expected Life Span:
NOTE: If you see any sign of wear and tear in the harness, it is better to retire the equipment.
Each piece of equipment is meticulously inspected and a batch is tested for breaking strength (destructive) before shipping.
User Instructions Download the PDF
Reviews
There are no reviews yet!