Be the first to write a review
You must be logged in to post a comment.
Free shipping on all orders
Free shipping on all orders
-
₹2,300.00
-
Six Step Etrier1 × ₹2,300.00 - Subtotal: ₹2,300.00
-
-
₹2,300.00
- Six Step Etrier1 × ₹2,300.00
- Subtotal: ₹2,300.00
-
Rappelling Mittens
₹899.00 (all prices include GST )
– Rappelling / Abseiling mittens
– Sturdy natural leather on the palms provides excellent insulation from heated equipment
– Soft cotton liner on the back of the hand for a soft feel
– A must have for every climber!
– One size fits all
Related products
-
A body harness would keep you in an upright position even in the case of unconsciousness
Material Composition and Physical Properties
- Webbings: 100% high tenacity Polyester
- Buckles: Alloy Steel
- Wide, flexible straps (43 mm and soft hand feel)
- Fully adjustable shoulder straps and leg loops for snug fit
- Weight: 800 grams
- Size: Universal (ADULTS)
- Instruction Booklet: Included
MBS and Certifications
- Buckle Breaking Strength (twisted and deformed but not broken): 12 kN
- Slippage of webbings under load of 20kN: 1 cm (maximum permissible slippage: 2 cm)
- Webbing Breaking Strength (single strand): 8kN
- Static Breaking Strength of the tie-in point in conformity to EN 12277: 22kN (minimum requirement by EN 12277 is 15kN)
- EN 12277 tested and certified
Expected Life Span:
- Shelf life (not used even once): 3 years
- Occasional usage: 3 years
- Excessive / frequent usage such as for commercial activities: 1 year
- Limited Warranty: 2 years but shall be void in case of equipment damage arising out of product misuse
NOTE: If you see any sign of wear and tear in the harness, it is better to retire the equipment.
Each piece of equipment is meticulously inspected and a batch is tested for breaking strength (destructive) before shipping.
User Instructions
Download the PDF
-
Sale!
-
– Stainless Steel 304 wedge type expansion bolts for outdoor use (not marine grade).
– Diameter: 10mm
– Placement length: 62mm
– Recommended length of bore in rock: 70mm
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)– EN959:2007, CE3076
- Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN.We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile)
- Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
- Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)
User Instructions
Download the PDF
User Instructions Download the PDF
Reviews
There are no reviews yet!