Be the first to write a review
You must be logged in to post a comment.
₹500.00 – ₹550.00
– Double rings anchors available in SS 316 (for M12 bolts) and SS 304 (for M10 bolts) grades
– Our regular Dynamo rock anchor conforms to EN 959:2016 and CE 3076
– MBS (rings): 30 kN
You must be logged in to post a comment.
– Rappelling / Abseiling mittens
– Sturdy natural leather on the palms provides excellent insulation from heated equipment
– Soft cotton liner on the back of the hand for a soft feel
– A must have for every climber!
– One size fits all
– A good all-rounder and durable helmet for ice climbing, mountaineering and multi-pitch trad climbing.
– Optimal ventilation via the integrated venting system
– Universal headlamp attachments
– Fits heads 52 to 61 cms
– 9 vents (6 on the sides and 3 on the back) make this helmet wearable even in hot weather conditions. “A helmet that makes your head warm could lead to more problems than just discomfort. At best it could lead to lead to a reduction in your performance, at worst it could lead to an impaired judgement that could possibly lead to injuries.”- BMC Helmet Guidebook
– Adujstable head band via the wheel at the rear, and adjustable Y straps; allow for comfortable and optimal fit.
– Materials: Acrylonitrile Butadiene Styrene & expanded Polyproplene
– Weight: 365 grams.
– CE EN 12492*, ANSI Z89.1-2009 type I class C, UIAA
User Instructions Download the PDF
– Pack of 5
– Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
– Bore diameter: 10mm
– This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
– Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
– This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
– If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
– Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.
The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.
M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)
– EN959:2007, CE3076
User Instructions Download the PDF
User Instructions Download the PDF
One Tool to rule them all!
A versatile nut tool designed for Trad, mixed- Sport and Big Wall climbing. Tightens nuts and maillons, wriggles out those obstinate nuts, and the hooked nose grabs onto cam bars in the deepest cracks. The screw driver end helps undo those stubborn knots, works as a pry tool, and finding an additional new use for this multi-tool is not a challenge.
– Weight: 64 g (2.3 oz.)
– Material: Zinc plated hardened Steel
– Built in wrenches of sizes 13, 17 & 19 mm, which work with 10, 12 mm & 3/8 inch Rawl bolts, open wrench sizes 14 & 17mm
– Philips head screw driver
– Centimeter markings along the side
Reviews
There are no reviews yet!