• Free shipping on all orders                                  

     

  • Free shipping on all orders                                       

     

PRODUCTS

Showing 26–50 of 119 results


  • Cotton Sleeping Bag liner in Mummy style for use inside sleeping bags

    Very soft hand feel with a small percentage of Lycra to enable the liner to turn along with you when you shift on your side. The Lycra blend also allows for you to stretch your legs inside the liner and feel less confined in a small space

    Packed Weight:  320 grams

    Product Size: 82 x 215 cm

    Packed Size: 20 x 15 x 7 cm

  • Cotton Sleeping Bag liner in a traveller style with an integrated pillow slip.

    Very soft hand feel with a small percentage of Lycra to enable the liner to turn along with you when you shift on your side. The Lycra blend also allows for you to stretch your legs inside the liner and feel less confined in a small space

    An essential to ensure hygiene over long trips in the mountains or back country, or even while slumming it out in seedy hotels while on adventure trips, or on the trains.

    Pillow Sleeve on the top and half sewn and half buttoned side seams to let you maintain a comfortable temperature and sleeping arrangement. Pillow is not included.

    Packed Weight:  400 grams

    Open Size: 90 x 215 cm

    Packed Size: 22 x 15 x 8 cm

  • – This Chalk Bag is made from Organic Cotton and Vegetable Dyes
    – Can be fastened to your waist using a sling
    – Good for Multi-pitch rock climbs

  • CAMPING CRUX EMERGENCY TENT 2,051.00
    Browse Wishlist

    Tarp tent with multiple possibilities to pitch it.

    This versatile and ultralight travel canopy can be used in diverse combinations for shelter from sun, rain or snow, or for a bivouac.  It features Polyester fabric with 1,500 mm Hydrostatic Head waterproof PU coating and fully taped seams.  There are 6 guy out points and 6 webbing loops.  Any of these could be used either to anchor the canopy to the ground or trees using guy lines, or you could simply pitch it using your trekking poles and make an A-shaped bivouac.
    Instruction Manual

     

  • – Double rings anchors available in SS 316 (for M12 bolts) and SS 304 (for M10 bolts) grades

    – Our regular Dynamo rock anchor conforms to EN 959:2016 and CE 3076

    – MBS (rings): 30 kN

  • A body harness would keep you in an upright position even in the case of unconsciousness

    Material Composition and Physical Properties

    • Webbings: 100% high tenacity Polyamide 6,6 (Nylon)
    • Buckles: 100% 304-L Stainless Steel
    • Wide, flexible straps (43 mm and soft hand feel)
    • Fully adjustable shoulder straps and leg loops for snug fit
    • Weight: 800 grams
    • Size: Universal (ADULTS)
    • Instruction Booklet: Included

    MBS and Certifications

    • Buckle Breaking Strength (twisted and deformed but not broken): 12 kN
    • Slippage of webbings under load of 20kN: 1 cm (maximum permissible slippage: 2 cm)
    • Webbing Breaking Strength (single strand): 8kN
    • Static Breaking Strength of the tie-in point in conformity to EN 12277: 22kN (minimum requirement by EN 12277 is 15kN)
    • EN 12277 tested and certified

    Expected Life Span:

    • Shelf life (not used even once): 3 years
    • Occasional usage: 3 years
    • Excessive / frequent usage such as for commercial activities: 1 year
    • Limited Warranty: 2 years but shall be void in case of equipment damage arising out of product misuse

    NOTE: If you see any sign of wear and tear in the harness, it is better to retire the equipment.

    Each piece of equipment is meticulously inspected and a batch is tested for breaking strength (destructive) before shipping.

    User Instructions    Download the PDF

     

  • A light weight and packable rain jacket.  Easy on your pocket, and has you covered when you need it.

    Comes with its own stuff sack.  Seam taped and water resistent PU coating on the fabrics.  Spacious enough to accommodate a 40 liter rucksack

    YKK front 1/4 neck zipper and cinch cord around the hoodie.  Full sleeved to keep you dry, and yet allows for articulation.

    Weight: 275 grams

  • Dynamo Expansion Bolt, M10X100mm, SS304, for rock anchors.

  • – Stainless Steel 304 wedge type expansion bolts for outdoor use (not marine grade).
    – Diameter: 10mm
    – Placement length: 62mm
    – Recommended length of bore in rock: 70mm
    – Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
    – This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
    – If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.

    The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.

    M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
    M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)

    – EN959:2007, CE3076

    • Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN.We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile)
    • Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
    • Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)

    User Instructions    Download the PDF
    User Instructions    Download the PDF

  • – Stainless Steel 304 wedge type expansion bolts for outdoor use (not marine grade).
    – Diameter: 12mm
    – Placement length: 87mm
    – Recommended length of bore in rock: 95mm
    – Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
    – This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
    – If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.

    The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.

    M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
    M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)

    – EN959:2007, CE3076

    • Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN.We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile)
    • Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
    • Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)

    User Instructions    Download the PDF
    User Instructions    Download the PDF

  • – Stainless Steel 316 wedge type expansion bolts for outdoor use (marine grade).
    – Diameter: 12mm
    – Placement length: 87mm
    – Recommended length of bore in rock: 95mm
    – Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
    – This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
    – If you are combining our bolts with hangers from another manufacturer, then ensure that they are made from the same grade of metal.

    The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.

    M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
    M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)

    – EN959:2007, CE3076

    • Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN.We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile)
    • Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
    • Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)

    User Instructions    Download the PDF
    User Instructions    Download the PDF

  • – Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
    – Bore diameter: 10mm
    – This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
    – Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
    – This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
    – If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
    – Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.

    The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.

    M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
    M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)

    – EN959:2007, CE3076

    • Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile).
    • Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
    • Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)

    User Instructions    Download the PDF
    User Instructions    Download the PDF

  • – Pack of 5
    – Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
    – Bore diameter: 10mm
    – This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
    – Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
    – This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
    – If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
    – Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.

    The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.

    M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
    M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)

    – EN959:2007, CE3076

    • Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile).
    • Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
    • Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)

    User Instructions    Download the PDF
    User Instructions    Download the PDF

  • – Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
    – Bore diameter: 12mm
    – This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
    – Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
    – This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
    – If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
    – Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.

    The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.

    M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
    M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)

    – EN959:2007, CE3076

    • Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile).
    • Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
    • Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)

    User Instructions    Download the PDF
    User Instructions    Download the PDF

  • – Pack of 5
    – Stainless Steel 304 Rock hangers for outdoor use (not marine grade).
    – Bore diameter: 12mm
    – This hanger features chamfered edges of the eye hole to minimize wear on carabiner. The eye hole itself is large enough to accommodate two carabiners.
    – Choose the bolt size carefully depending upon strength of base rock material. If the rock is soft or has uneven composition such as Sandstone and Limestone, then any rock anchor, including ours will not be strong enough to endure heavy loading.
    – This anchor is not recommended for use in coastal areas because it may not last as long as it normally should. For areas within 100 kms of coastline we recommend the anchors must be made in marine grade Stainless Steel. Contact us if you want these to be custom made!
    – If you are combining our hangers with your own bolts, ensure that they are made from the same grade of metal.
    – Each hanger is tested at a proof load of 8kN before shipping. You will be able to see a very small indentation on the side of the eye-hole. That is because it was tested in our lab for your safety.

    The recommendation below is based on several assumptions. Do your own due diligence before installing an anchor anywhere.

    M10 bolt: Only to be used in very hard rocks such as Granite (Compressive Strength > 75MPa)
    M12 Bolt: Only to be used in medium to high hardness rocks such as Sandstone (Compressive Strength > 30MPa)

    – EN959:2007, CE3076

    • Minimum Breaking Strength of Hanger is 25kN. Although the older versions are marked with 22kN, we guarantee 25kN. We take factor of safety into account with this figure of 25kN. Gipfel hangers are tested for breaking load often and none of them has ever failed under 38kN (the average breaking load has been 40kN) in both recommended direction of loading (radial) as well as in axial direction (Tensile).
    • Cutting Strength (Radial Load) in 50MPA test concrete block: 25kN (For Both M10 & M12 Sizes)
    • Pull-out strength (Axial load) in 50MPA test concrete block: 25kN (for M12 bolt) and 15kN (for M10 bolt)

    User Instructions    Download the PDF
    User Instructions    Download the PDF

  • Multi-season, Single-person, Ultralight-Freestanding Tent

    The freedom of the hills echoes through this breezy and yet sturdy tent.

    Gipfel’s Eiger series are light weight yet spacious tents featuring light weight materials and Featherlite poles.

    The tripod style design with a hub on one side makes the tent free standing with minimal weight of poles. The inner canopy is made from ultralight Nylon. The outer tent is made from siliconized Nylons to provide strength with minimal bulk and weight.

    The outer rainfly and groundsheet are fully seam taped and then tested under heavy rain. The ground sheet is bathtub style with minimal seams and reinforced stress points.

     

    Warranty: Limited warranty for 2 years

    Instruction Manual

  • Gipfel Eiger 2 is a 4 seasons and a 2-persons ultralight tent with decently spacious interiors. The weight of the tent is not reduced at the expense of comfort like our Gipfel Camp One tent and many other light weight tents in the market. The tent is so roomy that you can easily sit up straight inside the tent. The textiles are light weght yet very strong and made from our standard rip-stop Nylon 6,6 with Silicone and PU coatings. Fully seam taped.

    User / Product Instruction Manual:    Download the PDF

  • Fira series of tents are designed for 3-season usage but we have tested it diligently even at an altitude of 5,000 meters and it performed amazingly well. If you are looking for a high-quality light-weight tent with self-contained stability and 3-season weather-proofness, this is your tent.

    The interiors of this tent are ample for two persons. The tent is built to withstand heavy downpours of rain and even snow. The tent features aviation grade Aluminium poles in a classic X-pole dome type arrangement. The FIRA 3 and 4 persons also feature a very large vestibule.

    The tent is also built with very durable materials that can take a lot of rough use and UV- exposure.

    Fira is an all rounder tent and one of the most loved tents.

     

    hAssembly Instructions    Download the PDF
    Warranty Agreement Download the PDF

          

     

     

     

  • Fira series of tents are designed for 3-season usage. If you are looking for a high-quality light-weight tent with self-contained stability and 3-season weather-proofness, this is your tent.

    The LITE version builds on the proven design of the Fira series, and offers lighter materials to ensure savings in weight for backpacking trips. It also provides a fully breathable Nylon inner tent as opposed to the inner of regular Fira tent with a lot of mesh.

    The trail weight of tent is 2.05 kg. We understand that this is not the lightest tent for the given floor area but this is largely because we prefer to use 70D Rip Stop Nylon for the tent’s ground sheet. We could also choose to use 20D Nylon for ground sheet and lose another 300 grams but that would require the buyer to always buy and carry a Footprint with the tent to avoid abrasion and we feel it is not always ideal. With Gipfel Fira tent you never have to buy a footprint. Just our ground sheet is enough!

    The interiors of this tent are ample for two persons. The tent is built to withstand heavy downpours of rain and even snow. It features patented Jake’s foot attachments and our ring tensioners.

    The assembly instructions of Fira 2, Fira 2 Lite and Savanna 2 are identical. 

    Assembly Instructions    Download the PDF
    Warranty Agreement Download the PDF

          

     

     

     

  • Fira series of tents are designed for 3-season usage but we have tested it diligently even at an altitude of 5,000 meters and it performed amazingly well. If you are looking for a high-quality light-weight tent with self-contained stability and 3-season weather-proofness, this is your tent.

    The interiors of this tent are ample for two persons. The tent is built to withstand heavy downpours of rain and even snow. The tent features aviation grade Aluminium poles in a classic X-pole dome type arrangement. The FIRA 3 and 4 persons also feature a very large vestibule.

    The tent is also built with very durable materials that can take a lot of rough use and UV- exposure.

    Fira is an all rounder tent and one of the most loved tents.

     

    Assembly Instructions    Download the PDF
    Warranty Agreement Download the PDF

          

     

     

     

  • Fira series of tents are designed for 3-season usage but we have tested it diligently even at an altitude of 5,000 meters and it performed amazingly well. If you are looking for a high-quality light-weight tent with self-contained stability and 3-season weather-proofness, this is your tent.

    The interiors of this tent are ample for two persons. The tent is built to withstand heavy downpours of rain and even snow. The tent features aviation grade Aluminium poles in a classic X-pole dome type arrangement. The FIRA 3 and 4 persons also feature a very large vestibule.

    The tent is also built with very durable materials that can take a lot of rough use and UV- exposure.

    Fira is an all rounder tent and one of the most loved tents.

     

    Assembly Instructions    Download the PDF
    Warranty Agreement Download the PDF

          

     

     

     

  • Warmth boost for your adventures.

    Fleece Sleeping Bag liner in mummy style with cutout for the arms.

    An essential to ensure hygiene over long trips in the mountains or back country, or even while slumming it out in seedy hotels while on adventure trips, or on the trains.

    Fleece is brilliant; it is soft, has excellent insulation,

    Arm hole sleeves!  Why on earth would you need them?  You could sit up and read, play cards, drink your coffee lazily in the morning, play billiards, or you could let us know when you found a new reason to be glad to have them!

    By itself, works as a 15 degree sleeping bag, and adds 5-6 degrees of warmth when used to line another sleeping bag.

    Made from anti-pilling micro polar fleece.

    Packed Weight:  450 grams

    Open Size: 88 cm (shoulder width) x 218 cm (length)

    Packed Size: 22 x 15 x 8 cm

  • – Light weight draw string bag
    – Made from a strong nylon.
    – PVC Free

  • This sleeping bag is perfect for high altitude treks where temperature might drop to zero.

    The two-way YKK zipper has a generous drift tube on the side as well as a flap to prevent wind chill effect

    *Note* The fabrics, zippers and accessories are all tested in European labs for conformity to EN ISO standards to ensure functionality in -60°C temperature conditions. 

    Outer shell: 20D Nylon water repellent

    Inner Lining: 20D Nylon w/r, breathable

    Insulation: 100% Hollow fiber

    TID ratings as per ISO 13937 tests: Comfort: -0.5° C, Transition: -5°C; Critical: -22.5°C

    Packed Weight : 1.32 kg

    Sale!
  • This sleeping bag is perfect for high altitude treks where temperature might drop to sub zero.

    The two-way YKK zipper has a generous drift tube on the side as well as a flap to prevent wind chill effect

    *Note* The fabrics, zippers and accessories are all tested in European labs for conformity to EN ISO standards to ensure functionality in -60°C temperature conditions. 

    Outer shell: 20D Nylon water repellent

    Inner Lining: 20D Nylon w/r, breathable

    Insulation: 100% Hollow fiber

    TID ratings as per ISO 13937 tests: Comfort: -8.2° C, Transition: -15.2°C; Critical: -22.5°C

    Packed Weight : 1.52 kg

    Sale!

Showing 26–50 of 119 results

Filter by price

Cart